Phenol Removal from Wastewaters by Electrochemical Biosensor
The aim of this work is to introduce bacteria into the matrix of natural phosphate to catalyze the phenol oxidation in the wastewater.This electrode, designated subsequently by bacteria-NP-CPE, Showed stable response and was characterized with voltammeter methods, as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and DRX. The experimental results revealed that the prepared electrode could be a feasible for degradation of hazardous phenol pollutants in the wastewater.
2. Palmas et al., 2007; Anglada et al., 2009
3. M. Czaplicka. J. Hazard. Mater., 134 (2006) 45.
4. N. B. Tahar and A. Savall. Electrochim. Acta, 54 (2009) 4809.
5. E. Hur, G. Bereket, B. Duran, D. Ozdemir and Y. Sahin. Prog. Org. Coat., 60 (2007) 153.
6. G. Mengoli and M. M. Musiani. Electrochim. Acta, 31 (1986) 201.
7. Maallah R, Chtaini A (2018) Bacterial Electrode for the Oxidation and Detection of Phenol. Pharm Anal Acta 9: 580. doi: 10.4172/2153-2435.1000580.
8. Maallah R, Moutcine A, Chtaini A (2016) Bioelectrochemical Systems for Clean Environment. J Biosens Bioelectron 7: 231. doi: 10.4172/2155-1.6210.1000231
Copyright (c) 2019 R. Maallah ,A. Chtaini
This work is licensed under a Creative Commons Attribution 4.0 International License.